E-mail Bilz(847) 734-9390
E-mail BilzRequest Info



ET1 - Tool Holder Engraving Chuck

Accurate marking of tools during your machining production.

ET1 tool image

Safety parts such as ABS brake parts for cars must be clearly identified for product liability reasons. These parts are normally manufactured completely on machining centers and marked for identification during production.

The BILZ special tool holder ET1 is interchangeable with other normal tools in the machine spindle. The ET1 has a spindle with ball bearings and an axial way of 10 mm with a specified force.

With suitable feed of the machine spindle, the ball pen is pressed into the workpiece surface so that each required marking can be written. The ball pen is clamped in a Rubber Flex® collet and is easy to change.

All standard machine connections are available on request.