The next generation! Process optimization by innovation
The minimum length compensation on pressure and retraction (± 0.15 mm) as well as the radial damping compensate minimum deviations in position and discrepancies between the actual feed and the pitch of the tap. The flank pressure and therefore also the abrasion at the thread flanks is reduced considerably.
Independent of cooling and lubricant type, the new SCK is suitable for:
Independent of the collet, length compensation can now be adjusted either from the collet side or the holder side.
Consistent, high-quality cutting performance, process security, and easy handling increase tool life up to 100%:
(847) 734-9390