ISG3200-WK

The universal all-in-one solution for tool changing in record times

  • Processor controlled 10 KW high frequency generator
  • Shrinking range Ø 3 – 32 mm solid carbide and Ø 6 – 32 mm HSS with only 1 coil
  • Second coil for shrinking range till Ø 50 mm
  • Max. shrinking length 450 mm (can be increased optionally by extending the guide unit)
  • Max. cooling length 400 mm
  • Cooling of all shrinking chucks without separate cooling adaptors possible
  • No danger of burning by touching the heated shrinking chucks
  • No damage of the tool blade by the cooling adaptors
  • For all standard tool spindles by means of a simple change of the tool holder
  • Fully automatic shrinking and cooling process, fast tool change times of less than 30 seconds
  • No overheating of the shrinking chucks while using programmed parameters
  • Manual shrinking cycle for free adjustment of generator power and heating time
  • Easy control by graphic display with dialog function
  • Adjustable delay time for every shrinking cycle
  • Corrosion protection by use of emulsion
  • 30 l coolant tank in the housing
The ISG3200WK combines shrinking technology with water cooling. With the new all-in one solution the shrinking and cooling cycle is done in one position.
By the automated process the heated shrinking chuck is moved down in the cooling position with a pneumatic cylinder after the heating time. In the cooling position the chuck is flooded directly with emulsion. After the set water cooling time the chuck moves upwards. During the movement the air is blowing drying the chuck. This completely new kind of cooling achieves a record tool change time. Contact with the heated chucks is not possible and so there is no danger of burns.