HFP - quick change tapping chucks
HFP- the safest method of wireless monitoring for multispindle
tapping is now even more safe.
Together with the Bilz Quick Change Chucks and adaptors the HFP
system can securely monitor the right hand rotation as well as the
left hand rotation.
The hight frequency transmitter integrated in the chuck reacts on
the length compensation of the chuck wich is pressed together
while the safety cluch is engaging in the right hand direction and
which is pulled out in the left hand direction.
The released signal is transmitted over the antenna to the HFreceiver
and than used for stopping the machine.
To secure a safe signal also under difficult conditions for example
while the the tapping chuck is in the workpiece or in the device, the
HF transmitter pulses the signal for 5 sec.
The position of the chuck changes in this time while driving back in
start position and the HF signal reaches the receiver securely.
The effective monitoring of the right hand rotation and the pulsing
of the signal after initialising the tapping operation means that
malfunctions are detected immediately. Scrap or expensive subsquent
machining will be avoided with this system.
