| WE tap adapters |
| WE style adapters provide quick change to tapping operations. Positive torque transmission. |
|
|
| WES tap adapters |
| WES style adapters provide quick change to tapping operations with torque control for tap safety. |
|
|
| WEN tap adapters |
WEN style adapters provide quick change to tapping operations with length adjustment. Positive torque transmission.
WEN adapters are available in an wide range of extended lengths also. |
|
|
| WER adapters |
| WER style adapters offer the same benefits as WE adapters, the insertion depth is reduced for shorter tap shanks. |
|
|
| WRE adapters |
| WRE style adapters are reducing adapters to accomodate smaller tap adapters in one size larger holders. |
|
|
| WEK adapters |
| WEK style adapters extend the range of useable taps - FOR LIGHT MACHINING ONLY. No quick change capability, the tap is clamped with two set screws. |
|
|
| WENE adapters |
| WENE style adapters extend the range of useable taps - FOR LIGHT MACHINING ONLY. Quick change capability and length adjustment. |
|
|
| WENER adapters |
| WENER style adapters extend the range of useable taps - FOR LIGHT MACHINING ONLY. Quick change capability and length adjustment - with reduced insertion depth for short tap shanks. |
|
|
| WESN adapters |
WESN style adapters provide quick change to tapping operations with length adjustment and torque control.
|
|
|
| WESK adapters |
| WESK style adapters extend the range of useable taps - FOR LIGHT MACHINING ONLY. No quick change capability, the tap is clamped with two set screws. Torque control. |
|
|
| WESKR adapters |
| WESKR style adapters extend the range of useable taps - FOR LIGHT MACHINING ONLY. No quick change capability, the tap is clamped with two set screws. Torque control. Reduced insertion depth for shorter tap shanks. |
|
|